也可拖拽圖片到此處自動(dòng)識別，或在微信/QQ截圖后點(diǎn)擊此處后Ctrl+V
- 首頁(yè)
- 第三方數據
- A.Z. Meisterteile
- Joint Kit, drive shaft
| 參考號 | 零件 | 參數 |
|---|---|---|
| A.Z. Meisterteile : AZMT-43-030-1010 | Joint Kit, drive shaft | External Toothing wheel side: 20 ; Internal Toothing wheel side: 30 ; Seal diam.: 52 mm; Length: 106 mm; Thread Size: M16x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Joint ?: 85 mm; New Part: ; Bellows Material: TPE (thermoplastic elastomer) ; |
| A.Z. Meisterteile : AZMT-43-030-1011 | Joint Kit, drive shaft | External Toothing wheel side: 26 ; Internal Toothing wheel side: 23 ; Seal diam.: 56 mm; Length: 151 mm; Thread Size: M19x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Supplementary Article/Info 2: with crown nut ; Joint ?: 82 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1012 | Joint Kit, drive shaft | External Toothing wheel side: 23 ; Internal Toothing wheel side: 25 ; Seal diam.: 56 mm; Length: 146 mm; Thread Size: M20x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Fitting ?, ABS Sensor Ring: 75 mm; Joint ?: 90 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1013 | Joint Kit, drive shaft | External Toothing wheel side: 36 ; Internal Toothing wheel side: 30 ; Seal diam.: 52 mm; Length: 106 mm; Thread Size: M16x1.5 ; Joint Type: CV Joint ; Machined: without groove in internal component ; Joint ?: 85 mm; New Part: ; Bellows Material: TPE (thermoplastic elastomer) ; |
| A.Z. Meisterteile : AZMT-43-030-1014 | Joint Kit, drive shaft | External Toothing wheel side: 36 ; Internal Toothing wheel side: 27 ; Seal diam.: 53 mm; Length: 143 mm; Thread Size: M20x1.5 ; Joint Type: CV Joint ; Machined: without groove in internal component ; Supplementary Article/Info 2: with nut ; Joint ?: 98 mm; New Part: ; Bellows Material: TPE (thermoplastic elastomer) ; |
| A.Z. Meisterteile : AZMT-43-030-1015 | Joint Kit, drive shaft | External Toothing wheel side: 25 ; Internal Toothing wheel side: 24 ; Seal diam.: 51 mm; Length: 152 mm; Thread Size: M24x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Joint ?: 85 mm; New Part: ; Bellows Material: TPE (thermoplastic elastomer) ; |
| A.Z. Meisterteile : AZMT-43-030-1016 | Joint Kit, drive shaft | External Toothing wheel side: 27 ; Internal Toothing wheel side: 26 ; Seal diam.: 56 mm; Length: 155 mm; Thread Size: M22x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Joint ?: 91 mm; New Part: ; Bellows Material: TPE (thermoplastic elastomer) ; |
| A.Z. Meisterteile : AZMT-43-030-1017 | Joint Kit, drive shaft | External Toothing wheel side: 36 ; Internal Toothing wheel side: 30 ; Seal diam.: 60 mm; Length: 95 mm; Thread Size: M16x1.5x77 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Supplementary Article/Info 2: with screw ; Joint ?: 90 mm; New Part: ; Bellows Material: TPE (thermoplastic elastomer) ; |
| A.Z. Meisterteile : AZMT-43-030-1018 | Joint Kit, drive shaft | Seal diam.: 34 mm; Length: 142 mm; External Toothing differential side: 34 ; Tooth Gaps, profile shaft conn.: 25 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Joint ?: 94 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1019 | Joint Kit, drive shaft | External Toothing wheel side: 38 ; Internal Toothing wheel side: 27 ; Seal diam.: 60 mm; Number of Teeth, ABS ring: 48 ; Length: 99 mm; Thread Size: M16x1.5x77 ; Joint Type: CV Joint ; Machined: with groove in internal component ; ABS ring ?: 104 mm; Supplementary Article/Info 2: with screw ; Joint ?: 98 mm; New Part: ; Bellows Material: TPE (thermoplastic elastomer) ; |
| A.Z. Meisterteile : AZMT-43-030-1020 | Joint Kit, drive shaft | External Toothing wheel side: 35 ; Internal Toothing wheel side: 45 ; Seal diam.: 70 mm; Number of Teeth, ABS ring: 54 ; Length: 189 mm; Thread Size: M33x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; ABS ring ?: 122 mm; Joint ?: 114 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1021 | Joint Kit, drive shaft | External Toothing wheel side: 26 ; Internal Toothing wheel side: 32 ; Seal diam.: 55 mm; Number of Teeth, ABS ring: 50 ; Length: 136 mm; Thread Size: M22x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; ABS ring ?: 91 mm; Joint ?: 87 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1022 | Joint Kit, drive shaft | External Toothing wheel side: 22 ; Internal Toothing wheel side: 22 ; Seal diam.: 52 mm; Number of Teeth, ABS ring: 29 ; Length: 144 mm; Thread Size: M20x1.0 ; Joint Type: CV Joint ; Machined: with groove in internal component ; ABS ring ?: 79 mm; Joint ?: 81 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1023 | Joint Kit, drive shaft | External Toothing wheel side: 33 ; Internal Toothing wheel side: 30 ; Seal diam.: 53 mm; Number of Teeth, ABS ring: 45 ; Length: 91 mm; Thread Size: M14x1.5x73 ; Joint Type: CV Joint ; Machined: with groove in internal component ; ABS ring ?: 81 mm; Supplementary Article/Info 2: with screw ; Joint ?: 88 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1024 | Joint Kit, drive shaft | External Toothing wheel side: 23 ; Internal Toothing wheel side: 20 ; Seal diam.: 49 mm; Length: 148 mm; Thread Size: M18x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Joint ?: 72 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1025 | Joint Kit, drive shaft | External Toothing wheel side: 22 ; Internal Toothing wheel side: 30 ; Seal diam.: 53 mm; Length: 130 mm; Thread Size: M20x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Supplementary Article/Info 2: with nut ; Joint ?: 81 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1026 | Joint Kit, drive shaft | External Toothing wheel side: 38 ; Internal Toothing wheel side: 27 ; Seal diam.: 60 mm; Number of Teeth, ABS ring: 45 ; Length: 97 mm; Thread Size: M16x1.5x77 ; Joint Type: CV Joint ; Machined: with groove in internal component ; ABS ring ?: 81 mm; Supplementary Article/Info 2: with screw ; Joint ?: 98 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1027 | Joint Kit, drive shaft | External Toothing wheel side: 22 ; Internal Toothing wheel side: 22 ; Seal diam.: 52 mm; Number of Teeth, ABS ring: 29 ; Length: 144 mm; Thread Size: M20x1.0 ; Joint Type: CV Joint ; Machined: with groove in internal component ; ABS ring ?: 78 mm; Joint ?: 81 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1028 | Joint Kit, drive shaft | External Toothing wheel side: 38 ; Internal Toothing wheel side: 33 ; Seal diam.: 60 mm; Length: 99 mm; Thread Size: M16x1.5x77 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Supplementary Article/Info 2: with screw ; Joint ?: 98 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1029 | Joint Kit, drive shaft | External Toothing wheel side: 33 ; Internal Toothing wheel side: 27 ; Seal diam.: 53 mm; Number of Teeth, ABS ring: 45 ; Length: 93 mm; Thread Size: M14x1.5x73 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Supplementary Article/Info 2: with screw ; Joint ?: 98 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1030 | Joint Kit, drive shaft | External Toothing wheel side: 23 ; Internal Toothing wheel side: 19 ; Seal diam.: 49 mm; Length: 148 mm; Thread Size: M18x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Joint ?: 69 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1031 | Joint Kit, drive shaft | External Toothing wheel side: 28 ; Internal Toothing wheel side: 39 ; Seal diam.: 63 mm; Number of Teeth, ABS ring: 54 ; Length: 175 mm; Thread Size: M28x1.5 ; Joint Type: CV Joint ; Machined: without groove in internal component ; ABS ring ?: 110 mm; Joint ?: 98 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1032 | Joint Kit, drive shaft | External Toothing wheel side: 33 ; Internal Toothing wheel side: 25 ; Seal diam.: 52 mm; Number of Teeth, ABS ring: 29 ; Length: 170 mm; Thread Size: M20x1.0 ; Joint Type: CV Joint ; Machined: with groove in internal component ; ABS ring ?: 78 mm; Joint ?: 90 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1033 | Joint Kit, drive shaft | External Toothing wheel side: 25 ; Internal Toothing wheel side: 22 ; Seal diam.: 57 mm; Length: 141 mm; Thread Size: M22x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Joint ?: 84 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1035 | Joint Kit, drive shaft | External Toothing wheel side: 38 ; Internal Toothing wheel side: 27 ; Seal diam.: 60 mm; Length: 99 mm; Thread Size: M16x1.5x77 ; Joint Type: CV Joint ; Machined: without groove in internal component ; Supplementary Article/Info 2: with screw ; Joint ?: 98 mm; New Part: ; Bellows Material: TPE (thermoplastic elastomer) ; |
| A.Z. Meisterteile : AZMT-43-030-1036 | Joint Kit, drive shaft | External Toothing wheel side: 23 ; Internal Toothing wheel side: 19 ; Seal diam.: 44 mm; Length: 148 mm; Thread Size: M18x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Joint ?: 72 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1037 | Joint Kit, drive shaft | Fitting Position: Wheel Side ; External Toothing wheel side: 22 ; Internal Toothing wheel side: 22 ; Seal diam.: 47 mm; Outer Diameter: 83 mm; Length: 135.5 mm; Joint Type: CV Joint ; Surface: Powder coated ; Drive Shaft: without ABS ring ; |
| A.Z. Meisterteile : AZMT-43-030-1038 | Joint Kit, drive shaft | External Toothing wheel side: 23 ; Internal Toothing wheel side: 19 ; Seal diam.: 46 mm; Number of Teeth, ABS ring: 40 ; Length: 148 mm; Thread Size: M18x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; ABS ring ?: 76 mm; Joint ?: 69 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1039 | Joint Kit, drive shaft | Length: 34 mm; Bore ?: 8 mm; Tooth Gaps, profile shaft conn.: 33 ; Number of bores: 6 ; Bolt Hole Circle ?: 86 mm; Joint Type: Flexible Joint Disc ; Machined: without groove in internal component ; Supplementary Article/Info 2: with cap ; Joint ?: 100 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1040 | Joint Kit, drive shaft | External Toothing wheel side: 22 ; Internal Toothing wheel side: 28 ; Seal diam.: 52 mm; Number of Teeth, ABS ring: 29 ; Length: 150 mm; Thread Size: M20x1.0 ; Joint Type: CV Joint ; Machined: with groove in internal component ; ABS ring ?: 78 mm; Supplementary Article/Info 2: with crown nut ; Joint ?: 76 mm; New Part: ; Bellows Material: TPE (thermoplastic elastomer) ; |
| A.Z. Meisterteile : AZMT-43-030-1041 | Joint Kit, drive shaft | Length: 32 mm; Bore ?: 10.20 mm; Thread Size: M10x1.5x48 ; Tooth Gaps, profile shaft conn.: 28 ; Number of bores: 6 ; Bolt Hole Circle ?: 94 mm; Joint Type: Flexible Joint Disc ; Machined: without groove in internal component ; Supplementary Article/Info 2: with bolts/screws ; Joint ?: 108 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1042 | Joint Kit, drive shaft | External Toothing wheel side: 33 ; Internal Toothing wheel side: 30 ; Seal diam.: 53 mm; Number of Teeth, ABS ring: 45 ; Length: 91 mm; Thread Size: M14x1.5x73 ; Joint Type: CV Joint ; Machined: with groove in internal component ; ABS ring ?: 74 mm; Supplementary Article/Info 2: with screw ; Joint ?: 88 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1043 | Joint Kit, drive shaft | External Toothing wheel side: 23 ; Internal Toothing wheel side: 19 ; Seal diam.: 44 mm; Length: 145 mm; Thread Size: M18x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Joint ?: 69 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1044 | Joint Kit, drive shaft | Length: 32 mm; Bore ?: 8.20 mm; Tooth Gaps, profile shaft conn.: 33 ; Number of bores: 6 ; Bolt Hole Circle ?: 78 mm; Joint Type: Flexible Joint Disc ; Machined: without groove in internal component ; Supplementary Article/Info 2: with cap ; Joint ?: 94 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1045 | Joint Kit, drive shaft | Length: 34 mm; Bore ?: 8 mm; Tooth Gaps, profile shaft conn.: 33 ; Number of bores: 6 ; Bolt Hole Circle ?: 86 mm; Joint Type: Flexible Joint Disc ; Machined: without groove in internal component ; Supplementary Article/Info 2: with cap ; Joint ?: 100 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1046 | Joint Kit, drive shaft | Fitting Position: Front Axle Left ; External Toothing wheel side: 33 ; Internal Toothing wheel side: 25 ; Seal diam.: 52 mm; Outer Diameter: 90.2 mm; Length: 170 mm; Joint Type: CV Joint ; Surface: Powder coated ; Drive Shaft: without ABS ring ; |
| A.Z. Meisterteile : AZMT-43-030-1047 | Joint Kit, drive shaft | External Toothing wheel side: 38 ; Internal Toothing wheel side: 36 ; Seal diam.: 60 mm; Number of Teeth, ABS ring: 48 ; Length: 105 mm; Thread Size: M16x1.5x77 ; Joint Type: CV Joint ; Machined: without groove in internal component ; ABS ring ?: 83 mm; Supplementary Article/Info 2: with screw ; Joint ?: 101 mm; New Part: ; Bellows Material: TPE (thermoplastic elastomer) ; |
| A.Z. Meisterteile : AZMT-43-030-1048 | Joint Kit, drive shaft | External Toothing wheel side: 27 ; Internal Toothing wheel side: 27 ; Seal diam.: 38 mm; Number of Teeth, ABS ring: 48 ; Length: 162 mm; Thread Size: M22x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; ABS ring ?: 101 mm; Joint ?: 98 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1049 | Joint Kit, drive shaft | External Toothing wheel side: 27 ; Internal Toothing wheel side: 36 ; Seal diam.: 72 mm; Number of Teeth, ABS ring: 48 ; Length: 167 mm; Thread Size: M22x1.5 ; Joint Type: CV Joint ; Machined: without groove in internal component ; ABS ring ?: 101 mm; Joint ?: 101 mm; New Part: ; Bellows Material: TPE (thermoplastic elastomer) ; |
| A.Z. Meisterteile : AZMT-43-030-1050 | Joint Kit, drive shaft | External Toothing wheel side: 36 ; Internal Toothing wheel side: 27 ; Seal diam.: 60 mm; Length: 100 mm; Thread Size: M16x1.5x77 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Supplementary Article/Info 2: with screw ; Joint ?: 98 mm; New Part: ; Bellows Material: TPE (thermoplastic elastomer) ; |
| A.Z. Meisterteile : AZMT-43-030-1051 | Joint Kit, drive shaft | External Toothing wheel side: 25 ; Internal Toothing wheel side: 20 ; Seal diam.: 57 mm; Length: 138 mm; Thread Size: M22x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Joint ?: 72 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1052 | Joint Kit, drive shaft | Length: 32 mm; Bore ?: 10.20 mm; Thread Size: M10x1.5x48 ; Tooth Gaps, profile shaft conn.: 33 ; Number of bores: 6 ; Bolt Hole Circle ?: 94 mm; Joint Type: Flexible Joint Disc ; Machined: without groove in internal component ; Supplementary Article/Info 2: with bolts/screws ; Joint ?: 108 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1053 | Joint Kit, drive shaft | External Toothing wheel side: 25 ; Internal Toothing wheel side: 22 ; Seal diam.: 49 mm; Length: 146 mm; Thread Size: M18x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Joint ?: 76 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1054 | Joint Kit, drive shaft | External Toothing wheel side: 28 ; Internal Toothing wheel side: 27 ; Seal diam.: 63 mm; Length: 175 mm; Thread Size: M28x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Joint ?: 100 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1055 | Joint Kit, drive shaft | External Toothing wheel side: 38 ; Internal Toothing wheel side: 27 ; Seal diam.: 60 mm; Number of Teeth, ABS ring: 48 ; Length: 99 mm; Thread Size: M16x1.5x77 ; Joint Type: CV Joint ; Machined: with groove in internal component ; ABS ring ?: 83 mm; Supplementary Article/Info 2: with screw ; Joint ?: 98 mm; New Part: ; Bellows Material: TPE (thermoplastic elastomer) ; |
| A.Z. Meisterteile : AZMT-43-030-1057 | Joint Kit, drive shaft | External Toothing wheel side: 22 ; Internal Toothing wheel side: 22 ; Seal diam.: 52 mm; Length: 144 mm; Thread Size: M20x1.0 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Joint ?: 81 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1058 | Joint Kit, drive shaft | External Toothing wheel side: 36 ; Internal Toothing wheel side: 30 ; Seal diam.: 53 mm; Length: 129 mm; Thread Size: M20x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Supplementary Article/Info 2: with nut ; Joint ?: 81 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1059 | Joint Kit, drive shaft | External Toothing wheel side: 28 ; Internal Toothing wheel side: 36 ; Seal diam.: 65 mm; Number of Teeth, ABS ring: 51 ; Length: 168 mm; Thread Size: M24x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; ABS ring ?: 102 mm; Joint ?: 101 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1060 | Joint Kit, drive shaft | Fitting Position: Wheel Side ; External Toothing wheel side: 28 ; Internal Toothing wheel side: 27 ; Seal diam.: 67.1 mm; Number of Teeth, ABS ring: 51 ; Outer Diameter: 102 mm; Length: 158 mm; Joint Type: CV Joint ; Surface: Powder coated ; Drive Shaft: with ABS ring ; |
| A.Z. Meisterteile : AZMT-43-030-1061 | Joint Kit, drive shaft | External Toothing wheel side: 26 ; Internal Toothing wheel side: 22 ; Seal diam.: 48 mm; Length: 181 mm; Thread Size: M8x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Joint ?: 76 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1062 | Joint Kit, drive shaft | External Toothing wheel side: 23 ; Internal Toothing wheel side: 20 ; Seal diam.: 49 mm; Length: 148 mm; Thread Size: M18x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Joint ?: 72 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1063 | Joint Kit, drive shaft | External Toothing wheel side: 22 ; Internal Toothing wheel side: 20 ; Seal diam.: 46 mm; Length: 127 mm; Thread Size: M22x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Joint ?: 78 mm; New Part: ; Bellows Material: TPE (thermoplastic elastomer) ; |
| A.Z. Meisterteile : AZMT-43-030-1064 | Joint Kit, drive shaft | External Toothing wheel side: 22 ; Internal Toothing wheel side: 30 ; Seal diam.: 53 mm; Length: 139 mm; Thread Size: M20x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Supplementary Article/Info 2: with nut ; Joint ?: 88 mm; New Part: ; Bellows Material: TPE (thermoplastic elastomer) ; |
| A.Z. Meisterteile : AZMT-43-030-1065 | Joint Kit, drive shaft | External Toothing wheel side: 22 ; Internal Toothing wheel side: 21 ; Seal diam.: 51 mm; Length: 134 mm; Thread Size: M22x1.5 ; Braking/Driving Dynamics: for vehicles with ABS ; Joint Type: CV Joint ; Machined: with groove in internal component ; Joint ?: 75 mm; New Part: ; Bellows Material: TPE (thermoplastic elastomer) ; |
| A.Z. Meisterteile : AZMT-43-030-1066 | Joint Kit, drive shaft | External Toothing wheel side: 33 ; Internal Toothing wheel side: 30 ; Seal diam.: 53 mm; Length: 91 mm; Thread Size: M14x1.5x73 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Supplementary Article/Info 2: with screw ; Joint ?: 88 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1067 | Joint Kit, drive shaft | External Toothing wheel side: 26 ; Internal Toothing wheel side: 25 ; Seal diam.: 65 mm; Outer Diameter: 90 mm; Bellows Material: Rubber ; |
| A.Z. Meisterteile : AZMT-43-030-1068 | Joint Kit, drive shaft | External Toothing wheel side: 22 ; Internal Toothing wheel side: 29 ; Seal diam.: 52 mm; Length: 151 mm; Thread Size: M20x1.0 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Joint ?: 84 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1069 | Joint Kit, drive shaft | External Toothing wheel side: 21 ; Internal Toothing wheel side: 22 ; Seal diam.: 49 mm; Number of Teeth, ABS ring: 48 ; Length: 141 mm; Thread Size: M20x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; ABS ring ?: 99 mm; Joint ?: 80 mm; New Part: ; Bellows Material: TPE (thermoplastic elastomer) ; |
| A.Z. Meisterteile : AZMT-43-030-1070 | Joint Kit, drive shaft | External Toothing wheel side: 25 ; Internal Toothing wheel side: 25 ; Seal diam.: 51 mm; Length: 143 mm; Thread Size: M24x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Joint ?: 89 mm; New Part: ; Bellows Material: TPE (thermoplastic elastomer) ; |
| A.Z. Meisterteile : AZMT-43-030-1071 | Joint Kit, drive shaft | External Toothing wheel side: 25 ; Internal Toothing wheel side: 22 ; Seal diam.: 55 mm; Length: 125 mm; Thread Size: M24x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Joint ?: 83 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1072 | Joint Kit, drive shaft | Seal diam.: 35 mm; Length: 130 mm; External Toothing differential side: 22 ; Tooth Gaps, profile shaft conn.: 22 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Joint ?: 84 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1073 | Joint Kit, drive shaft | External Toothing wheel side: 25 ; Internal Toothing wheel side: 22 ; Seal diam.: 50 mm; Length: 151 mm; Thread Size: M22x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Supplementary Article/Info 2: with crown nut ; Joint ?: 76 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1074 | Joint Kit, drive shaft | External Toothing wheel side: 27 ; Internal Toothing wheel side: 39 ; Seal diam.: 58 mm; Number of Teeth, ABS ring: 48 ; Length: 141 mm; Thread Size: M24x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; ABS ring ?: 99 mm; Joint ?: 95 mm; New Part: ; Bellows Material: TPE (thermoplastic elastomer) ; |
| A.Z. Meisterteile : AZMT-43-030-1075 | Joint Kit, drive shaft | External Toothing wheel side: 26 ; Internal Toothing wheel side: 22 ; Seal diam.: 56 mm; Length: 150 mm; Thread Size: M22x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Joint ?: 79 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1076 | Joint Kit, drive shaft | External Toothing wheel side: 27 ; Internal Toothing wheel side: 34 ; Seal diam.: 58 mm; Number of Teeth, ABS ring: 48 ; Length: 135 mm; Thread Size: M24x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; ABS ring ?: 99 mm; Joint ?: 86 mm; New Part: ; Bellows Material: TPE (thermoplastic elastomer) ; |
| A.Z. Meisterteile : AZMT-43-030-1077 | Joint Kit, drive shaft | External Toothing wheel side: 22 ; Internal Toothing wheel side: 20 ; Seal diam.: 48 mm; Length: 150 mm; Thread Size: M20x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Joint ?: 81 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1078 | Joint Kit, drive shaft | External Toothing wheel side: 33 ; Internal Toothing wheel side: 25 ; Seal diam.: 52 mm; Length: 170 mm; Thread Size: M20x1.0 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Joint ?: 90 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1079 | Joint Kit, drive shaft | External Toothing wheel side: 26 ; Internal Toothing wheel side: 22 ; Seal diam.: 56 mm; Length: 147 mm; Thread Size: M22x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Joint ?: 77 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1080 | Joint Kit, drive shaft | External Toothing wheel side: 22 ; Internal Toothing wheel side: 22 ; Seal diam.: 51 mm; Length: 147 mm; Thread Size: M22x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Joint ?: 79 mm; New Part: ; Bellows Material: TPE (thermoplastic elastomer) ; |
| A.Z. Meisterteile : AZMT-43-030-1081 | Joint Kit, drive shaft | |
| A.Z. Meisterteile : AZMT-43-030-1082 | Joint Kit, drive shaft | Fitting Position: Wheel Side ; External Toothing wheel side: 33 ; Internal Toothing wheel side: 28 ; Seal diam.: 52 mm; Outer Diameter: 75 mm; Length: 158.5 mm; Joint Type: CV Joint ; Surface: Powder coated ; Drive Shaft: without ABS ring ; |
| A.Z. Meisterteile : AZMT-43-030-1083 | Joint Kit, drive shaft | External Toothing wheel side: 26 ; Internal Toothing wheel side: 23 ; Seal diam.: 56 mm; Length: 150 mm; Thread Size: M22x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Supplementary Article/Info 2: with crown nut ; Joint ?: 82 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1084 | Joint Kit, drive shaft | |
| A.Z. Meisterteile : AZMT-43-030-1085 | Joint Kit, drive shaft | External Toothing wheel side: 22 ; Internal Toothing wheel side: 30 ; Seal diam.: 51 mm; Length: 130 mm; Thread Size: M20x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Supplementary Article/Info 2: with nut ; Joint ?: 81 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1086 | Joint Kit, drive shaft | External Toothing wheel side: 20 ; Internal Toothing wheel side: 20 ; Seal diam.: 43 mm; Length: 153 mm; Thread Size: M20x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Supplementary Article/Info 2: with nut ; Joint ?: 80 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1087 | Joint Kit, drive shaft | |
| A.Z. Meisterteile : AZMT-43-030-1088 | Joint Kit, drive shaft | Length: 32 mm; Bore ?: 8.90 mm; Tooth Gaps, profile shaft conn.: 33 ; Number of bores: 6 ; Bolt Hole Circle ?: 78 mm; Joint Type: Flexible Joint Disc ; Machined: without groove in internal component ; Supplementary Article/Info 2: with cap ; Joint ?: 92 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1089 | Joint Kit, drive shaft | External Toothing wheel side: 26 ; Internal Toothing wheel side: 30 ; Seal diam.: 55 mm; Length: 133 mm; Thread Size: M22x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Joint ?: 80 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1090 | Joint Kit, drive shaft | External Toothing wheel side: 35 ; Internal Toothing wheel side: 29 ; Seal diam.: 72 mm; Length: 197 mm; Thread Size: M33x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Joint ?: 106 mm; New Part: ; Bellows Material: TPE (thermoplastic elastomer) ; |
| A.Z. Meisterteile : AZMT-43-030-1091 | Joint Kit, drive shaft | External Toothing wheel side: 35 ; Internal Toothing wheel side: 29 ; Seal diam.: 72 mm; Length: 199 mm; Thread Size: M33x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Joint ?: 106 mm; New Part: ; Bellows Material: TPE (thermoplastic elastomer) ; |
| A.Z. Meisterteile : AZMT-43-030-1092 | Joint Kit, drive shaft | External Toothing wheel side: 25 ; Internal Toothing wheel side: 25 ; Seal diam.: 60 mm; Length: 129 mm; Thread Size: M20x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Joint ?: 89 mm; New Part: ; Bellows Material: TPE (thermoplastic elastomer) ; |
| A.Z. Meisterteile : AZMT-43-030-1093 | Joint Kit, drive shaft | External Toothing wheel side: 22 ; Internal Toothing wheel side: 30 ; Seal diam.: 53 mm; Length: 139 mm; Thread Size: M20x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Supplementary Article/Info 2: with nut ; Joint ?: 90 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1094 | Joint Kit, drive shaft | Length: 32 mm; Bore ?: 10.20 mm; Tooth Gaps, profile shaft conn.: 28 ; Number of bores: 6 ; Bolt Hole Circle ?: 94 mm; Joint Type: Flexible Joint Disc ; Machined: without groove in internal component ; Supplementary Article/Info 2: with cap ; Joint ?: 108 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1095 | Joint Kit, drive shaft | External Toothing wheel side: 25 ; Internal Toothing wheel side: 23 ; Seal diam.: 53 mm; Length: 146 mm; Thread Size: M22x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Joint ?: 82 mm; New Part: ; Bellows Material: TPE (thermoplastic elastomer) ; |
| A.Z. Meisterteile : AZMT-43-030-1096 | Joint Kit, drive shaft | |
| A.Z. Meisterteile : AZMT-43-030-1097 | Joint Kit, drive shaft | |
| A.Z. Meisterteile : AZMT-43-030-1098 | Joint Kit, drive shaft | External Toothing wheel side: 25 ; Internal Toothing wheel side: 22 ; Seal diam.: 55 mm; Length: 164 mm; Thread Size: M22x1.5 ; Braking/Driving Dynamics: for vehicles without ABS ; Joint Type: CV Joint ; Machined: with groove in internal component ; Supplementary Article/Info 2: with crown nut ; Joint ?: 81 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1099 | Joint Kit, drive shaft | External Toothing wheel side: 25 ; Internal Toothing wheel side: 22 ; Seal diam.: 56 mm; Length: 140 mm; Thread Size: M22x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Joint ?: 81 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1100 | Joint Kit, drive shaft | External Toothing wheel side: 22 ; Internal Toothing wheel side: 30 ; Seal diam.: 53 mm; Length: 130 mm; Thread Size: M20x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Supplementary Article/Info 2: with nut ; Joint ?: 81 mm; New Part: ; Bellows Material: TPE (thermoplastic elastomer) ; |
| A.Z. Meisterteile : AZMT-43-030-1101 | Joint Kit, drive shaft | External Toothing wheel side: 33 ; Internal Toothing wheel side: 22 ; Seal diam.: 52 mm; Length: 156 mm; Thread Size: M20x1.0 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Joint ?: 81 mm; New Part: ; Bellows Material: TPE (thermoplastic elastomer) ; |
| A.Z. Meisterteile : AZMT-43-030-1102 | Joint Kit, drive shaft | External Toothing wheel side: 22 ; Internal Toothing wheel side: 20 ; Seal diam.: 72 mm; Length: 124 mm; Thread Size: M22x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Joint ?: 70 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1103 | Joint Kit, drive shaft | External Toothing wheel side: 25 ; Internal Toothing wheel side: 22 ; Seal diam.: 59 mm; Length: 134 mm; Thread Size: M24x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; Joint ?: 79 mm; New Part: ; Bellows Material: TPE (thermoplastic elastomer) ; |
| A.Z. Meisterteile : AZMT-43-030-1107 | Joint Kit, drive shaft | External Toothing wheel side: 27 ; Internal Toothing wheel side: 30 ; Seal diam.: 57 mm; Number of Teeth, ABS ring: 44 ; Length: 143 mm; Thread Size: M22x1.5 ; Joint Type: CV Joint ; Machined: with groove in internal component ; ABS ring ?: 91 mm; Joint ?: 82 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1108 | Joint Kit, drive shaft | External Toothing wheel side: 28 ; Seal diam.: 57 mm; Number of Teeth, ABS ring: 48 ; Length: 685 mm; Thread Size: M24x2.0 ; Tooth Gaps, profile shaft conn.: 26 ; Drive -/ PTO Shafts: with profile shaft ; ABS ring ?: 104 mm; Joint ?: 90 mm; |
| A.Z. Meisterteile : AZMT-43-030-1109 | Joint Kit, drive shaft | External Toothing wheel side: 22 ; Internal Toothing wheel side: 28 ; Seal diam.: 52 mm; Number of Teeth, ABS ring: 29 ; Length: 153 mm; for manufacturer: Delphi ; Thread Size: M20x1.0 ; Joint Type: CV Joint ; Machined: with groove in internal component ; ABS ring ?: 78 mm; Joint ?: 81 mm; New Part: ; Bellows Material: NBR (nitrile butadiene rubber) ; |
| A.Z. Meisterteile : AZMT-43-030-1111 | Joint Kit, drive shaft | Fitting Position: Wheel Side ; External Toothing wheel side: 23 ; Internal Toothing wheel side: 30 ; Seal diam.: 49 mm; Outer Diameter: 83.6 mm; Length: 145 mm; Joint Type: CV Joint ; Surface: Powder coated ; Drive Shaft: without ABS ring ; |
| A.Z. Meisterteile : AZMT-43-030-1113 | Joint Kit, drive shaft | Fitting Position: transmission sided ; Seal diam.: 71 mm; Outer Diameter: 108 mm; Length: 57.6 mm; Tooth Gaps, profile shaft conn.: 30 ; Joint Type: Tripod Joint ; Surface: Powder coated ; Drive Shaft: without ABS ring ; Joint ?: 73.8 mm; |
| A.Z. Meisterteile : AZMT-43-030-1117 | Joint Kit, drive shaft | Fitting Position: Wheel Side ; External Toothing wheel side: 33 ; Internal Toothing wheel side: 22 ; Seal diam.: 52 mm; Number of Teeth, ABS ring: 47 ; Length: 148.5 mm; Joint Type: CV Joint ; Surface: Powder coated ; Drive Shaft: with ABS ring ; |
| A.Z. Meisterteile : AZMT-43-030-1118 | Joint Kit, drive shaft | Fitting Position: Wheel Side ; External Toothing wheel side: 28 ; Internal Toothing wheel side: 28 ; Seal diam.: 59 mm; Number of Teeth, ABS ring: 48 ; Length: 189.5 mm; Joint Type: CV Joint ; Surface: Powder coated ; Drive Shaft: with ABS ring ; |
| A.Z. Meisterteile : AZMT-43-030-1119 | Joint Kit, drive shaft | Fitting Position: Wheel Side ; External Toothing wheel side: 21 ; Internal Toothing wheel side: 30 ; Seal diam.: 52.2 mm; Number of Teeth, ABS ring: 26 ; Length: 144.5 mm; Joint Type: CV Joint ; Surface: Powder coated ; Drive Shaft: with ABS ring ; |
共
329
條記錄，分4
頁(yè)顯示